Amazon.com Price: $298.98 (as of 24/09/2022 06:03 PST- Details)

100 Watts per Channel Minimum into 8 Ohms, 2 Channels Driven, FTC
Auto power on/off
High current, low impedance drive


Product Description

Ideal for high quality stereo listening, for expanding your surround system from 5.1 to 6.1 or 7.1 channels to deliver the contemporary home theater surround formats, and for multiroom setups, Onkyo’s M-282 stereo power amplifier makes an impressive and reasonably priced system upgrade. The amp uses Onkyo’s exclusive Wide Vary Amplifier Technology and pumps 2 x 100 watts per channel RMS into 8 ohm speakers and 2 x 125 wpc into 6 ohms. (For dynamic power handling, you are looking at 2 x 140 watts into 8 ohms, 2 x 125 watts into 6 ohms.) If you are going for an upgrade from 5.1 to 7.1, ensure that your 5.1 surround receiver has preamplifier outputs for 7.1 channels. The M-282 most effective amplifies a line-stage signal; it does no longer come with surround processing or a quantity keep an eye on like a standard preamplifier or an built-in amplifier/surround receiver. You’ll be able to rig the amp to power up whilst it senses an audio signal or via using a 12-volt trigger (same old to automation systems). The receiver additionally options audio passthrough jacks in case you wish to have to daisy-chain a few like elements via a few rooms for multi-room distribution of your number one listening supply. The receiver uses Onkyo’s Wide Vary Amplifier Technology (WRAT), which ensures signal accuracy even with Prime-answer sources such as DVD-Audio and SACD. In step with Onkyo, WRAT gets rid of the adverse effects of counter-electromotive force through applying an strangely low quantity of NFB (bad feedback), constructing the amp with moderately decided on, Prime-tolerance, wide-Vary portions in all important sections, and the usage of cutting edge circuit topology in accordance with the corporate’s decades of enjoy construction Prime-finish amplifiers. The end result? A flat response beyond 100 kHz. Rear-panel connections and controls consist of a floor (use provided that the system shows an audible hum), an input-stage adjustment, 1 every stereo analog (left/proper) RCA audio input and passthrough/output, a trigger atmosphere (audio, 12-volt, off), a 12-volt trigger input jack, left/proper speaker outputs with banana-plug-pleasant binding-post speaker terminals, and a grounded AC power terminal. What is within the Box – Power amplifier, an AC power twine, and a user’s manual.

Amazon.com

Ideal for high quality stereo listening, for expanding your surround system from 5.1 to 6.1 or 7.1 channels to deliver the contemporary home theater surround formats, and for multiroom setups, Onkyo’s M-282 stereo power amplifier makes an impressive and reasonably priced system upgrade. The amp uses Onkyo’s exclusive Wide Vary Amplifier Technology and pumps 2 x 100 watts per channel RMS into 8 ohm speakers and 2 x 125 wpc into 6 ohms. (For dynamic power handling, you are looking at 2 x 140 watts into 8 ohms, 2 x 125 watts into 6 ohms.)

If you are going for an upgrade from 5.1 to 7.1, ensure that your 5.1 surround receiver has preamplifier outputs for 7.1 channels. The M-282 most effective amplifies a line-stage signal; it does no longer come with surround processing or a quantity keep an eye on like a standard preamplifier or an built-in amplifier/surround receiver.

You’ll be able to rig the amp to power up whilst it senses an audio signal or via using a 12-volt trigger (same old to automation systems). The receiver additionally options audio passthrough jacks in case you wish to have to daisy-chain a few like elements via a few rooms for multi-room distribution of your number one listening supply.

The receiver uses Onkyo’s Wide Vary Amplifier Technology (WRAT), which ensures signal accuracy even with Prime-answer sources such as DVD-Audio and SACD. In step with Onkyo, WRAT gets rid of the adverse effects of counter-electromotive force through applying an strangely low quantity of NFB (bad feedback), constructing the amp with moderately decided on, Prime-tolerance, wide-Vary portions in all important sections, and the usage of cutting edge circuit topology in accordance with the corporate’s decades of enjoy construction Prime-finish amplifiers. The end result? A flat response beyond 100 kHz.

Rear-panel connections and controls consist of a floor (use provided that the system shows an audible hum), an input-stage adjustment, 1 every stereo analog (left/proper) RCA audio input and passthrough/output, a trigger atmosphere (audio, 12-volt, off), a 12-volt trigger input jack, left/proper speaker outputs with banana-plug-pleasant binding-post speaker terminals, and a grounded AC power terminal.

What’s within the Box
Power amplifier, an AC power twine, and a user’s manual.

From the Manufacturer

2 Channel Power Amplifier offering 100 watts of power per channel.

<a href="javascript:void(0)" data-action="a-expander-toggle" class="a-expander-header a-declarative a-expander-extend-header" data-a-expander-toggle="Pushed, FTC
Auto power on/off
Prime current, low impedance drive
Preamp-stage input-output loop
12 Volt trigger and input stage adjustment

0/5 (0 Reviews)
Manufacturer

Brand

Reviews

There are no reviews yet.

Be the first to review “Onkyo M-282 2-Channel Power Amplifier (Discontinued by Manufacturer)”

Your email address will not be published. Required fields are marked *